Curve And Intersection Warning Radar WTR-510 is mainly used to detect various types of motor vehicles, non-motor vehicles, pedestrians, and feed back the direction, distance, and speed of the incoming vehicle. In addition to being used for speed feedback reminders on various roads such as expressways, grade highways, intercity highways, urban arterial highways, urban and rural low-grade highways. It can also be applied to early warning of vehicle meeting in urban roads, steep slopes, mountain roads and other bends and blind areas, as well as various levels of road intersections, or main and branch road intersections with visual blind areas and other intersections.
Key Features
1.Detection range up to 150m
2.Small size, light weight, easy to install
3.Low power consumption, less electricity, solar powered
4.Adaptable to harsh environment or poor lighting conditions
5.Detect multiple lanes at the same time, reducing inspection costs
6.The connection method is simple, the radar is directly connected to the LED display
Typical Application
1.Curved road meeting warning
When the radar detects the incoming car, the speed feedback screen will display the real-time speed of the incoming car, and through the linkage with the oncoming curve meeting early warning system, it will send an incoming car early warning signal to the opposite curve meeting early warning system. After receiving the warning signal, the meeting car early warning system will display a red warning text, the warning light will flash yellow, and a voice alarm will be issued at the same time. Through the car early warning screen when entering the curve, the driver can see the driving information and its own vehicle speed, which has the function of warning and prompting for the driver , So as to effectively remind the driver to slow down and drive through bends cautiously.
2.Traffic/pedestrian warning at intersection
When the radar detects an incoming car or pedestrian , it will send an incoming car/pedestrian crossing warning signal to the warning display or the on-screen voice announcer. For example, the red warning text and the speed of the incoming car is displayed. The sound and light alarm system can also be used to remind pedestrians or vehicle drivers , effectively avoiding traffic accidents.
Specification
Model
|
WTR-510
|
Frequency
|
24.15GHz
|
Antenna angle
|
13.6°×37°
|
Frequency deviation
|
<±45MHz
|
Speed range
|
(4~400) km/h
|
Speed accuracy
|
(-4~0) km/h
|
Detection range
|
>150m
|
Update cycle
|
(50~2000)ms, adjustable
|
Direction
|
Approaching , receding and both
|
Interface
|
Full duplex RS232 or half duplex RS485
|
Power
|
(8.5~26) VDC
|
Operating power
|
0.7W
|
Operating temp
|
-40℃~85℃
|
Operating humidity
|
5%~95%
|