Vehicle Speed Measuring Radar TBR-511 is mainly used to measure the speed of motor vehicles in the speed feedback screen. When the radar detects that the driving speed exceeds the set value, the speed feedback screen will warn the driver by blinking (or changing the color) of the LED. In order to achieve the purpose of reminding the driver to reduce the driving speed and reducing the road traffic accidents caused by overspeeding.
Key Features
1.Detection range up to 80m
2.Small size, light weight, easy to install
3.Low power consumption, less electricity
4.Adaptable to harsh environment or poor lighting conditions
5.The connection method is simple, the radar is directly connected to the LED display
Typical Application
1.Schools, hospitals, stadiums, etc.
2.Three-dimensional parking lot, factory entrance and exit, etc.
3.Railway transportation area, etc.
4.Turns, road junctions, etc.
5.High-speed driving section, temporary construction section, etc.
6.Convergence points of arterial roads, accident-prone areas, etc.
Specification
|
Model
|
TBR-511
|
|
Frequency
|
24.15GHz
|
|
Antenna angle
|
24°×37°
|
|
Frequency deviation
|
＜±45MHz
|
|
Speed range
|
(4~400) km/h
|
|
Speed accuracy
|
(-4~0) km/h
|
|
Numbers of lanes covered
|
1~4
|
|
Detection range
|
＞80m
|
|
Update cycle
|
(50~2000)ms, adjustable
|
|
Direction
|
Approaching , receding and both
|
|
Interface
|
Full duplex RS232 or half duplex RS485
|
|
Power
|
(5~26) VDC
|
|
Operating power
|
＜0.8W
|
|
Operating temp
|
-40℃~85℃
|
|
Operating humidity
|
5%~95%
|
